Nejdelší stránky

Skočit na navigaci Skočit na vyhledávání

Níže zobrazuji nejvýše 500 výsledků v rozsahu #1–#500.

Ukázat (500 předchozích | 500 následujících) (20 | 50 | 100 | 250 | 500).

  1. (historie) ‎Standard MIDI Format ‎[14 006 bajtů]
  2. (historie) ‎Farebná paleta ‎[10 766 bajtů]
  3. (historie) ‎Ing. Zdenko Sekerák - Profesionálny životopis ‎[6 376 bajtů]
  4. (historie) ‎Uživatel:Zdeno Sekerák ‎[5 811 bajtů]
  5. (historie) ‎Procedura ‎[5 638 bajtů]
  6. (historie) ‎GetGraphMode ‎[5 069 bajtů]
  7. (historie) ‎Šaral - nový programovací jazyk ‎[5 018 bajtů]
  8. (historie) ‎J(podmínka) - blízky skok při splnení podmínky ‎[4 812 bajtů]
  9. (historie) ‎Reklama ‎[4 615 bajtů]
  10. (historie) ‎Direktivy a jejich ekvivalenty v IDE ‎[4 428 bajtů]
  11. (historie) ‎Štruktúra programu ‎[4 278 bajtů]
  12. (historie) ‎Volby příkazové řádky ‎[4 231 bajtů]
  13. (historie) ‎InstallUserDriver ‎[4 167 bajtů]
  14. (historie) ‎Práca so súborom ‎[3 960 bajtů]
  15. (historie) ‎OutText ‎[3 867 bajtů]
  16. (historie) ‎Funkce a procedury jednotky CRT ‎[3 847 bajtů]
  17. (historie) ‎Mikroprocesor 80286 ‎[3 808 bajtů]
  18. (historie) ‎Symboly ve výrazech ‎[3 803 bajtů]
  19. (historie) ‎RegisterBGIfont ‎[3 521 bajtů]
  20. (historie) ‎Proměnné a typové konstanty jednotky System ‎[3 513 bajtů]
  21. (historie) ‎Direktivy assembleru ‎[3 422 bajtů]
  22. (historie) ‎Direktivy assembleru DB, DW a DD ‎[3 388 bajtů]
  23. (historie) ‎RegisterBGIdriver ‎[3 311 bajtů]
  24. (historie) ‎Prilohy ‎[3 255 bajtů]
  25. (historie) ‎Kam kráčaš Borland? ‎[3 163 bajtů]
  26. (historie) ‎Prvé jednoduché príkazy ‎[3 027 bajtů]
  27. (historie) ‎Crt ‎[2 997 bajtů]
  28. (historie) ‎SetViewPort ‎[2 940 bajtů]
  29. (historie) ‎Operátory výrazů integrovaného assembleru ‎[2 873 bajtů]
  30. (historie) ‎@ ‎[2 833 bajtů]
  31. (historie) ‎InitGraph ‎[2 828 bajtů]
  32. (historie) ‎Operátory ve výrazech ‎[2 745 bajtů]
  33. (historie) ‎Komentáre urobia program prehľadný ‎[2 695 bajtů]
  34. (historie) ‎RCL/RCR/ROL/ROR - instrukce rotací ‎[2 669 bajtů]
  35. (historie) ‎SETcond - nastav byte podle podmínky ‎[2 623 bajtů]
  36. (historie) ‎REC.CPP ‎[2 527 bajtů]
  37. (historie) ‎BlockRead ‎[2 527 bajtů]
  38. (historie) ‎RET - návrat z procedúry ‎[2 520 bajtů]
  39. (historie) ‎If ‎[2 518 bajtů]
  40. (historie) ‎BlockWrite ‎[2 506 bajtů]
  41. (historie) ‎IMUL - celočíselné násobení ‎[2 499 bajtů]
  42. (historie) ‎JMP - nepodmíněný skok ‎[2 446 bajtů]
  43. (historie) ‎Typy premenných ‎[2 416 bajtů]
  44. (historie) ‎Assign ‎[2 392 bajtů]
  45. (historie) ‎SAL/SAR/SHL/SHR - skupina instrukci posunu ‎[2 385 bajtů]
  46. (historie) ‎HeapBlock ‎[2 378 bajtů]
  47. (historie) ‎INS/INSB/INSW - vstup z portu do řetězce ‎[2 289 bajtů]
  48. (historie) ‎TextMode ‎[2 255 bajtů]
  49. (historie) ‎Reset ‎[2 213 bajtů]
  50. (historie) ‎Intr ‎[2 193 bajtů]
  51. (historie) ‎IDIV - celočíselné delení (se znaménkem) ‎[2 192 bajtů]
  52. (historie) ‎Ako napísať dobrý web ‎[2 192 bajtů]
  53. (historie) ‎CMPS - porovnej řetezcové operandy ‎[2 174 bajtů]
  54. (historie) ‎DIV - delení bez uvažování znaménka (unsigned division) ‎[2 152 bajtů]
  55. (historie) ‎Read ‎[2 139 bajtů]
  56. (historie) ‎Štruktogram ‎[2 100 bajtů]
  57. (historie) ‎ErrorAddr ‎[2 059 bajtů]
  58. (historie) ‎MOV - přesun dat ‎[2 055 bajtů]
  59. (historie) ‎Barevné konstanty ‎[2 052 bajtů]
  60. (historie) ‎Typové konstanty pole ‎[2 046 bajtů]
  61. (historie) ‎Príručka pre Pascal (lite) ‎[2 023 bajtů]
  62. (historie) ‎CALL - volání procedury ‎[2 020 bajtů]
  63. (historie) ‎Režimy grafických driverů ‎[1 993 bajtů]
  64. (historie) ‎SHLD/SHRD - instrukce dvojitého posuvu ‎[1 970 bajtů]
  65. (historie) ‎INT/INTO - generování přerušení - voláná přerušovací procedury ‎[1 967 bajtů]
  66. (historie) ‎Append ‎[1 949 bajtů]
  67. (historie) ‎Unit ‎[1 940 bajtů]
  68. (historie) ‎SetLineStyle ‎[1 929 bajtů]
  69. (historie) ‎Operační kódy prefixů ‎[1 918 bajtů]
  70. (historie) ‎SetWriteMode ‎[1 912 bajtů]
  71. (historie) ‎PackTime ‎[1 907 bajtů]
  72. (historie) ‎UnpackTime ‎[1 897 bajtů]
  73. (historie) ‎DEC.CPP ‎[1 894 bajtů]
  74. (historie) ‎GetFTime ‎[1 882 bajtů]
  75. (historie) ‎PUSHF - ulož registr příznaku na zásobník ‎[1 878 bajtů]
  76. (historie) ‎SetFTime ‎[1 864 bajtů]
  77. (historie) ‎5 - Zakázaný přístup ‎[1 831 bajtů]
  78. (historie) ‎SetPalette ‎[1 826 bajtů]
  79. (historie) ‎POPF - vyzvednutí obsahů příznakových registrů ‎[1 825 bajtů]
  80. (historie) ‎Window ‎[1 808 bajtů]
  81. (historie) ‎Relační operátory ‎[1 802 bajtů]
  82. (historie) ‎Rewrite ‎[1 791 bajtů]
  83. (historie) ‎PutImage ‎[1 776 bajtů]
  84. (historie) ‎Reťazec ‎[1 765 bajtů]
  85. (historie) ‎Write ‎[1 736 bajtů]
  86. (historie) ‎IRET - návrat z přerušení ‎[1 723 bajtů]
  87. (historie) ‎SetIntVec ‎[1 717 bajtů]
  88. (historie) ‎POP - vyzvedni operand ze zásobníku ‎[1 716 bajtů]
  89. (historie) ‎Uses ‎[1 712 bajtů]
  90. (historie) ‎FreeMem ‎[1 704 bajtů]
  91. (historie) ‎MOVS/MOVSB/MOVSW - přesun bytový nebo slovní řetězec ‎[1 703 bajtů]
  92. (historie) ‎Sector ‎[1 695 bajtů]
  93. (historie) ‎Rýchle kľúče Turbo Pascalu ‎[1 683 bajtů]
  94. (historie) ‎OUTS/OUTSB/OUTSW - výstup bytového/slovního řetezce na port ‎[1 673 bajtů]
  95. (historie) ‎Vyplňovací vzorky - konstanty ‎[1 671 bajtů]
  96. (historie) ‎GetFAttr ‎[1 653 bajtů]
  97. (historie) ‎OutTextXY ‎[1 650 bajtů]
  98. (historie) ‎LLDT- Zaveď registr tabulky lokálnich deskriptorů ‎[1 636 bajtů]
  99. (historie) ‎TextColor ‎[1 627 bajtů]
  100. (historie) ‎CMP - porovnej dva operandy ‎[1 621 bajtů]
  101. (historie) ‎LLDT - zaveď registr tabulky lokálních deskriptorů ‎[1 614 bajtů]
  102. (historie) ‎$G: Seskupování jednotek do segmentů ‎[1 603 bajtů]
  103. (historie) ‎SetAspectRatio ‎[1 603 bajtů]
  104. (historie) ‎FileExpand ‎[1 590 bajtů]
  105. (historie) ‎Reálné typy ‎[1 590 bajtů]
  106. (historie) ‎Repeat ‎[1 563 bajtů]
  107. (historie) ‎$A: Zarovnávání dat ‎[1 562 bajtů]
  108. (historie) ‎SCAS/SCASB/SCASW - porovnání řetezcových dat ‎[1 544 bajtů]
  109. (historie) ‎AND - logický součin dvou operandů ‎[1 536 bajtů]
  110. (historie) ‎ENTER - vytvor prostor v zásobníku pro parametry procedúry ‎[1 529 bajtů]
  111. (historie) ‎Priorita operátorů ‎[1 516 bajtů]
  112. (historie) ‎Flush ‎[1 515 bajtů]
  113. (historie) ‎High ‎[1 512 bajtů]
  114. (historie) ‎FillPoly ‎[1 510 bajtů]
  115. (historie) ‎XLAT - převod podle převodní tabulky ‎[1 509 bajtů]
  116. (historie) ‎PUSH - ulož slovo na vrchol zásobníku ‎[1 486 bajtů]
  117. (historie) ‎TextWidth ‎[1 482 bajtů]
  118. (historie) ‎LGDT/LIDT - zaveď registr tabulky globálních deskriptorů, zaveď registr tabulky deskriptorů přerušení ‎[1 481 bajtů]
  119. (historie) ‎Registrové symboly ‎[1 477 bajtů]
  120. (historie) ‎Paměťové oblasti, kde jsou umístěny segmenty ‎[1 474 bajtů]
  121. (historie) ‎$C: Atribut programového segmentu ‎[1 472 bajtů]
  122. (historie) ‎LOOP - cyklus řízený registrem CX ‎[1 461 bajtů]
  123. (historie) ‎SetTextBuf ‎[1 461 bajtů]
  124. (historie) ‎Bar3D ‎[1 456 bajtů]
  125. (historie) ‎Low ‎[1 455 bajtů]
  126. (historie) ‎OvrClearBuf ‎[1 454 bajtů]
  127. (historie) ‎Keep ‎[1 450 bajtů]
  128. (historie) ‎Line ‎[1 449 bajtů]
  129. (historie) ‎ARPL - Nastav pole RPL selektoru ‎[1 448 bajtů]
  130. (historie) ‎SetFillStyle ‎[1 442 bajtů]
  131. (historie) ‎LOCK - aktivuj signál BUS LOCK ‎[1 434 bajtů]
  132. (historie) ‎DetectGraph ‎[1 431 bajtů]
  133. (historie) ‎LSS/LFS/LGS - zaveď dvouslovní ukazatel ‎[1 428 bajtů]
  134. (historie) ‎XBTS - extrahuj bitový řetezec ‎[1 427 bajtů]
  135. (historie) ‎TextHeight ‎[1 418 bajtů]
  136. (historie) ‎Truncate ‎[1 415 bajtů]
  137. (historie) ‎SetGraphMode ‎[1 415 bajtů]
  138. (historie) ‎Inline ‎[1 407 bajtů]
  139. (historie) ‎Seek ‎[1 406 bajtů]
  140. (historie) ‎SetTextJustify ‎[1 406 bajtů]
  141. (historie) ‎BOUND - Konroluj index pole vzhledem k jeho hranicím ‎[1 405 bajtů]
  142. (historie) ‎XOR - logický exkluzivní součet XOR ‎[1 399 bajtů]
  143. (historie) ‎Řetězcové konstanty ‎[1 396 bajtů]
  144. (historie) ‎Specifikátory formátu ‎[1 394 bajtů]
  145. (historie) ‎$NOSWAP ‎[1 387 bajtů]
  146. (historie) ‎GetDefaultPalette ‎[1 382 bajtů]
  147. (historie) ‎New() ‎[1 375 bajtů]
  148. (historie) ‎IBTS - vlož bity do registru nebo paměťové lokace ‎[1 373 bajtů]
  149. (historie) ‎LODS/LODSW/LODSB - zaveď bytový nebo slovní řetezec do stradače ‎[1 373 bajtů]
  150. (historie) ‎$L: Informace o lokálních symbolech ‎[1 372 bajtů]
  151. (historie) ‎$M: Přidělování paměti ‎[1 370 bajtů]
  152. (historie) ‎GetMem ‎[1 370 bajtů]
  153. (historie) ‎STOS/STOSB/STOSW - uschovej řetezcová data ‎[1 368 bajtů]
  154. (historie) ‎Konvence zápisu řetězce v programu GREP ‎[1 367 bajtů]
  155. (historie) ‎Booleovské typy ‎[1 366 bajtů]
  156. (historie) ‎LEAVE - výstup z procedúry ‎[1 356 bajtů]
  157. (historie) ‎$N: Režim koprocesoru ‎[1 355 bajtů]
  158. (historie) ‎ImageSize ‎[1 353 bajtů]
  159. (historie) ‎LineTo ‎[1 352 bajtů]
  160. (historie) ‎Binární aritmetické operátory ‎[1 329 bajtů]
  161. (historie) ‎LMSW - nastav stavové slovo procesoru (MSW) ‎[1 328 bajtů]
  162. (historie) ‎GetFillSettings ‎[1 327 bajtů]
  163. (historie) ‎GraphResult ‎[1 321 bajtů]
  164. (historie) ‎$S Preferovaná velikost segmentu ‎[1 314 bajtů]
  165. (historie) ‎IN - vstup slova nebo bytu (z portu) ‎[1 308 bajtů]
  166. (historie) ‎GetMaxMode ‎[1 304 bajtů]
  167. (historie) ‎TypeOf ‎[1 295 bajtů]
  168. (historie) ‎DosExitCode ‎[1 292 bajtů]
  169. (historie) ‎GetImage ‎[1 291 bajtů]
  170. (historie) ‎Typy objektů (object) ‎[1 280 bajtů]
  171. (historie) ‎Rectangle ‎[1 279 bajtů]
  172. (historie) ‎Metóda ‎[1 272 bajtů]
  173. (historie) ‎MemAvail ‎[1 253 bajtů]
  174. (historie) ‎SetUserCharSize ‎[1 250 bajtů]
  175. (historie) ‎GetY ‎[1 245 bajtů]
  176. (historie) ‎$Y: Informace o odkazech na symboly ‎[1 244 bajtů]
  177. (historie) ‎GetX ‎[1 241 bajtů]
  178. (historie) ‎Znakové řetězce ‎[1 240 bajtů]
  179. (historie) ‎Absolute ‎[1 240 bajtů]
  180. (historie) ‎RestoreCrtMode ‎[1 240 bajtů]
  181. (historie) ‎SGDT/SIDT - uschovej registr GDT/IDT do paměti ‎[1 238 bajtů]
  182. (historie) ‎NEG - negace ve dvojkovém doplňkovém kódu ‎[1 238 bajtů]
  183. (historie) ‎TextBackground ‎[1 238 bajtů]
  184. (historie) ‎New ‎[1 237 bajtů]
  185. (historie) ‎MsDos ‎[1 234 bajtů]
  186. (historie) ‎ADD - sčítáni ‎[1 230 bajtů]
  187. (historie) ‎GetFillPattern ‎[1 229 bajtů]
  188. (historie) ‎Seg ‎[1 221 bajtů]
  189. (historie) ‎SBB - odečítaní s výpujčkou ‎[1 219 bajtů]
  190. (historie) ‎OR - logická disjunkce ‎[1 215 bajtů]
  191. (historie) ‎Číselné konstanty ‎[1 215 bajtů]
  192. (historie) ‎TEST - test logické srovnání ‎[1 214 bajtů]
  193. (historie) ‎Eof ‎[1 209 bajtů]
  194. (historie) ‎SetBkColor ‎[1 207 bajtů]
  195. (historie) ‎FilePos ‎[1 205 bajtů]
  196. (historie) ‎XCHG - záměna bytů nebo slov ‎[1 204 bajtů]
  197. (historie) ‎Ofs ‎[1 203 bajtů]
  198. (historie) ‎Procedure ‎[1 201 bajtů]
  199. (historie) ‎IOResult ‎[1 200 bajtů]
  200. (historie) ‎CSeg ‎[1 196 bajtů]
  201. (historie) ‎Exec ‎[1 194 bajtů]
  202. (historie) ‎Function ‎[1 193 bajtů]
  203. (historie) ‎Ordinální typy ‎[1 190 bajtů]
  204. (historie) ‎$E Emulace ‎[1 186 bajtů]
  205. (historie) ‎GetTextSettings ‎[1 180 bajtů]
  206. (historie) ‎Konstanty atributů souboru ‎[1 178 bajtů]
  207. (historie) ‎SetFillPattern ‎[1 176 bajtů]
  208. (historie) ‎GetBkColor ‎[1 176 bajtů]
  209. (historie) ‎SSeg ‎[1 163 bajtů]
  210. (historie) ‎SetActivePage ‎[1 163 bajtů]
  211. (historie) ‎Typy výrazů integrovaného assembleru ‎[1 160 bajtů]
  212. (historie) ‎VERR/VERW - verifikuj segment pro čtení nebo zápis ‎[1 158 bajtů]
  213. (historie) ‎POPA - vyzvedni všechny všeobecné registry ‎[1 158 bajtů]
  214. (historie) ‎Egavga ‎[1 154 bajtů]
  215. (historie) ‎Rename ‎[1 152 bajtů]
  216. (historie) ‎SUB - celočíselné odečítaní ‎[1 151 bajtů]
  217. (historie) ‎DSeg ‎[1 148 bajtů]
  218. (historie) ‎SPtr ‎[1 143 bajtů]
  219. (historie) ‎Assembler ‎[1 142 bajtů]
  220. (historie) ‎SetVisualPage ‎[1 139 bajtů]
  221. (historie) ‎Konstrukce podmíněného překladu ‎[1 136 bajtů]
  222. (historie) ‎LAR - zaveď byte přístupových oprávnení (access rights) ‎[1 134 bajtů]
  223. (historie) ‎MaxAvail ‎[1 132 bajtů]
  224. (historie) ‎MoveTo ‎[1 131 bajtů]
  225. (historie) ‎FloodFill ‎[1 131 bajtů]
  226. (historie) ‎$X: Rozšířená syntaxe ‎[1 126 bajtů]
  227. (historie) ‎DEC - dekrementace o 1 ‎[1 122 bajtů]
  228. (historie) ‎$R: Soubor zdrojů ‎[1 122 bajtů]
  229. (historie) ‎LSL - získej limit segmentu ‎[1 103 bajtů]
  230. (historie) ‎$D: Informace pro ladění ‎[1 100 bajtů]
  231. (historie) ‎SeekEoln ‎[1 098 bajtů]
  232. (historie) ‎SeekEof ‎[1 098 bajtů]
  233. (historie) ‎$Q: Kontrola přetečení ‎[1 090 bajtů]
  234. (historie) ‎FileSize ‎[1 088 bajtů]
  235. (historie) ‎Exclude ‎[1 087 bajtů]
  236. (historie) ‎GetDir ‎[1 081 bajtů]
  237. (historie) ‎Of ‎[1 079 bajtů]
  238. (historie) ‎GraphDefaults ‎[1 077 bajtů]
  239. (historie) ‎Ako mám zapnúť anglickú klávesnicu ‎[1 077 bajtů]
  240. (historie) ‎Char ‎[1 076 bajtů]
  241. (historie) ‎SetColor ‎[1 073 bajtů]
  242. (historie) ‎MOVZX/MOVSX - přesun s extenzi znaménkového bitů ‎[1 072 bajtů]
  243. (historie) ‎OvrGetBuf ‎[1 068 bajtů]
  244. (historie) ‎NormVideo ‎[1 066 bajtů]
  245. (historie) ‎GetArcCoords ‎[1 065 bajtů]
  246. (historie) ‎ADC - sčítaní s přenosem ‎[1 059 bajtů]
  247. (historie) ‎Zapuzdrenie ‎[1 054 bajtů]
  248. (historie) ‎$G: Generování kódu 80286 ‎[1 053 bajtů]
  249. (historie) ‎GetMaxColor ‎[1 051 bajtů]
  250. (historie) ‎DrawPoly ‎[1 041 bajtů]
  251. (historie) ‎Dedičnosť ‎[1 041 bajtů]
  252. (historie) ‎INC - zvýšení o jedničku ‎[1 039 bajtů]
  253. (historie) ‎AAA - nastav ASCII po sčítaní v AL ‎[1 039 bajtů]
  254. (historie) ‎Erase ‎[1 039 bajtů]
  255. (historie) ‎Pointer ‎[1 037 bajtů]
  256. (historie) ‎Val ‎[1 035 bajtů]
  257. (historie) ‎Dispose ‎[1 032 bajtů]
  258. (historie) ‎Asm ‎[1 027 bajtů]
  259. (historie) ‎TPUMOVER ‎[1 025 bajtů]
  260. (historie) ‎Příkaz integrovaného assembleru ‎[1 025 bajtů]
  261. (historie) ‎StrRScan ‎[1 025 bajtů]
  262. (historie) ‎Konstanty použité jako parametry TextMode ‎[1 024 bajtů]
  263. (historie) ‎$P: Otevřené řetězcové parametry ‎[1 023 bajtů]
  264. (historie) ‎GetCBreak ‎[1 023 bajtů]
  265. (historie) ‎Typy ukazatel ‎[1 020 bajtů]
  266. (historie) ‎JNB - Skok při nemenším ‎[1 012 bajtů]
  267. (historie) ‎JNGE - Skok při nevětším nebo rovném ‎[1 009 bajtů]
  268. (historie) ‎JNAE - Skok při nevětším nebo rovném ‎[1 009 bajtů]
  269. (historie) ‎JNLE - Skok při nemenším nebo rovném ‎[1 008 bajtů]
  270. (historie) ‎JNBE - Skok při nemenším nebo rovném ‎[1 008 bajtů]
  271. (historie) ‎STR - uschovej registr úlohy (task register) ‎[1 005 bajtů]
  272. (historie) ‎JBE - Skok při menším nebo rovném ‎[1 002 bajtů]
  273. (historie) ‎JGE - Skok při větším nebo rovném ‎[1 001 bajtů]
  274. (historie) ‎JAE - Skok při větším nebo rovném ‎[1 001 bajtů]
  275. (historie) ‎$O: Generování ovrlejového kódu ‎[1 001 bajtů]
  276. (historie) ‎Case ‎[1 001 bajtů]
  277. (historie) ‎JLE - Skok při menším nebo rovném ‎[1 000 bajtů]
  278. (historie) ‎NOT - logická negace ‎[999 bajtů]
  279. (historie) ‎JNO - Skok nebylo-li přetečení ‎[996 bajtů]
  280. (historie) ‎Implementation ‎[995 bajtů]
  281. (historie) ‎JNS - Skok nebylo-li znaménko ‎[993 bajtů]
  282. (historie) ‎JPO - Skok při liché parite ‎[992 bajtů]
  283. (historie) ‎JPE - Skok při sudé parite ‎[991 bajtů]
  284. (historie) ‎JCXZ - Skok při CX = 0 ‎[991 bajtů]
  285. (historie) ‎Halt ‎[991 bajtů]
  286. (historie) ‎FindNext ‎[991 bajtů]
  287. (historie) ‎JNP - Skok nebyla-li parita ‎[990 bajtů]
  288. (historie) ‎JNG - Skok při nevětším ‎[990 bajtů]
  289. (historie) ‎JNA - Skok při nevětším ‎[990 bajtů]
  290. (historie) ‎JNL - Skok při nemenším ‎[989 bajtů]
  291. (historie) ‎JNE - Skok při nerovnosti ‎[989 bajtů]
  292. (historie) ‎SLDT - uchovej registr tabulky lokálních deskriptorů ‎[989 bajtů]
  293. (historie) ‎Test8086 ‎[989 bajtů]
  294. (historie) ‎GetArgStr ‎[987 bajtů]
  295. (historie) ‎GetIntVec ‎[987 bajtů]
  296. (historie) ‎Program ‎[987 bajtů]
  297. (historie) ‎RmDir ‎[986 bajtů]
  298. (historie) ‎SwapVectors ‎[986 bajtů]
  299. (historie) ‎JO - Skok při přetečení ‎[985 bajtů]
  300. (historie) ‎JNC - Skok při CF = 0 ‎[985 bajtů]
  301. (historie) ‎Barvy pro 8514 ‎[985 bajtů]
  302. (historie) ‎Nemôžem spustiť Pascal pod Windows XP ‎[985 bajtů]
  303. (historie) ‎Inicializovanie ‎[985 bajtů]
  304. (historie) ‎JC - Skok při přenosu ‎[983 bajtů]
  305. (historie) ‎Vyhrazená slova integrovaného assembleru ‎[983 bajtů]
  306. (historie) ‎JS - Skok při znaménku ‎[982 bajtů]
  307. (historie) ‎JG - Skok při větším ‎[982 bajtů]
  308. (historie) ‎JA - Skok při větším ‎[982 bajtů]
  309. (historie) ‎JL - Skok při menším ‎[981 bajtů]
  310. (historie) ‎JE - Skok při rovnosti ‎[981 bajtů]
  311. (historie) ‎JB - Skok při menším ‎[981 bajtů]
  312. (historie) ‎Writeln ‎[981 bajtů]
  313. (historie) ‎MkDir ‎[980 bajtů]
  314. (historie) ‎JP - Skok při parite ‎[979 bajtů]
  315. (historie) ‎Dec ‎[979 bajtů]
  316. (historie) ‎Round ‎[978 bajtů]
  317. (historie) ‎Styly textu - konstanty ‎[978 bajtů]
  318. (historie) ‎FindFirst ‎[978 bajtů]
  319. (historie) ‎JZ - Skok při nule ‎[977 bajtů]
  320. (historie) ‎GetPalette ‎[977 bajtů]
  321. (historie) ‎GetTime ‎[977 bajtů]
  322. (historie) ‎DAA - dekadické nastavení po sečtení ‎[976 bajtů]
  323. (historie) ‎SetCBreak ‎[976 bajtů]
  324. (historie) ‎$O: Jméno ovrlejové jednotky ‎[974 bajtů]
  325. (historie) ‎Continue ‎[967 bajtů]
  326. (historie) ‎PUSHA - ulož do zásobníku všechny všeobecné registry ‎[965 bajtů]
  327. (historie) ‎$MEM ‎[964 bajtů]
  328. (historie) ‎Bar ‎[962 bajtů]
  329. (historie) ‎For...to ‎[962 bajtů]
  330. (historie) ‎Zvláštní symboly ‎[959 bajtů]
  331. (historie) ‎FillEllipse ‎[958 bajtů]
  332. (historie) ‎Close ‎[954 bajtů]
  333. (historie) ‎ClrScr ‎[952 bajtů]
  334. (historie) ‎Eoln ‎[950 bajtů]
  335. (historie) ‎SMSW - uchovej stavové slovo procesoru (MSW) ‎[949 bajtů]
  336. (historie) ‎GetAspectRatio ‎[949 bajtů]
  337. (historie) ‎Delete ‎[948 bajtů]
  338. (historie) ‎LTR - naplň registr úlohy ‎[946 bajtů]
  339. (historie) ‎CLTS - nuluj příznak TS ("Prepnutá úloha", task switched) ‎[946 bajtů]
  340. (historie) ‎$W: Zásobníkový rámec pro Windows ‎[946 bajtů]
  341. (historie) ‎ClrEol ‎[945 bajtů]
  342. (historie) ‎SetTextStyle ‎[944 bajtů]
  343. (historie) ‎Ptr ‎[942 bajtů]
  344. (historie) ‎Záznam souboru ‎[942 bajtů]
  345. (historie) ‎DAS – dekadické nastavení po odečítaní ‎[941 bajtů]
  346. (historie) ‎$CONFIG ‎[935 bajtů]
  347. (historie) ‎SetGraphBufSize ‎[935 bajtů]
  348. (historie) ‎$I: Vložený soubor ‎[930 bajtů]
  349. (historie) ‎Inc ‎[928 bajtů]
  350. (historie) ‎CloseGraph ‎[928 bajtů]
  351. (historie) ‎SetAllPalette ‎[927 bajtů]
  352. (historie) ‎GetVerify ‎[927 bajtů]
  353. (historie) ‎Virtuálna metóda ‎[925 bajtů]
  354. (historie) ‎GetLineSettings ‎[923 bajtů]
  355. (historie) ‎Pascalské typy ‎[921 bajtů]
  356. (historie) ‎InstallUserFont ‎[917 bajtů]
  357. (historie) ‎StrLIComp ‎[916 bajtů]
  358. (historie) ‎REP/REPZ/REPE/PEPNE/REPNZ - opakuj řetezcovou operaci ‎[914 bajtů]
  359. (historie) ‎Ukazatelové typové konstanty ‎[914 bajtů]
  360. (historie) ‎SetVerify ‎[914 bajtů]
  361. (historie) ‎Compile to exe ‎[913 bajtů]
  362. (historie) ‎Grafické drivery ‎[909 bajtů]
  363. (historie) ‎GetColor ‎[905 bajtů]
  364. (historie) ‎Deštruktor ‎[905 bajtů]
  365. (historie) ‎AAS - nastav ASCII AL po odečítaní ‎[904 bajtů]
  366. (historie) ‎Celočíselné typy ‎[904 bajtů]
  367. (historie) ‎ClearViewPort ‎[903 bajtů]
  368. (historie) ‎GetEnvVar ‎[899 bajtů]
  369. (historie) ‎Circle ‎[899 bajtů]
  370. (historie) ‎Copy ‎[898 bajtů]
  371. (historie) ‎HDD-Hitachi ‎[897 bajtů]
  372. (historie) ‎GetViewSettings ‎[895 bajtů]
  373. (historie) ‎StrScan ‎[894 bajtů]
  374. (historie) ‎SetRGBPalette ‎[893 bajtů]
  375. (historie) ‎GetEnv ‎[892 bajtů]
  376. (historie) ‎Ako písať zdrojový kód ‎[890 bajtů]
  377. (historie) ‎Délky řetězcových částí jména souboru ‎[887 bajtů]
  378. (historie) ‎GetDate ‎[887 bajtů]
  379. (historie) ‎DosError ‎[886 bajtů]
  380. (historie) ‎LEA - zaveď offset efektívnim adresy ‎[881 bajtů]
  381. (historie) ‎ClearDevice ‎[881 bajtů]
  382. (historie) ‎DelLine ‎[876 bajtů]
  383. (historie) ‎String ‎[871 bajtů]
  384. (historie) ‎HLT - zastavení provádení programu ‎[869 bajtů]
  385. (historie) ‎Typové konstanty záznamu ‎[868 bajtů]
  386. (historie) ‎Trunc ‎[868 bajtů]
  387. (historie) ‎FSplit ‎[866 bajtů]
  388. (historie) ‎Ellipse ‎[865 bajtů]
  389. (historie) ‎StrMove ‎[861 bajtů]
  390. (historie) ‎Assigned ‎[861 bajtů]
  391. (historie) ‎Arc ‎[859 bajtů]
  392. (historie) ‎Str ‎[848 bajtů]
  393. (historie) ‎OvrInitEMS ‎[845 bajtů]
  394. (historie) ‎Randomize ‎[844 bajtů]
  395. (historie) ‎Set ‎[844 bajtů]
  396. (historie) ‎Lokální návěští ‎[843 bajtů]
  397. (historie) ‎SetFAttr ‎[842 bajtů]
  398. (historie) ‎Přemístitelné a absolutní výrazy ‎[841 bajtů]
  399. (historie) ‎Přemístitelné výrazy ‎[841 bajtů]
  400. (historie) ‎Statická metóda ‎[838 bajtů]
  401. (historie) ‎CLI - nuluj příznak prěrušení (IF) ‎[837 bajtů]
  402. (historie) ‎AssignCrt ‎[836 bajtů]
  403. (historie) ‎Vstupní a závěrečný kód assembleru ‎[834 bajtů]
  404. (historie) ‎GetPaletteSize ‎[834 bajtů]
  405. (historie) ‎$B: Vyhodnocení logických výrazů ‎[827 bajtů]
  406. (historie) ‎Insert ‎[824 bajtů]
  407. (historie) ‎ChDir ‎[812 bajtů]
  408. (historie) ‎InsLine ‎[812 bajtů]
  409. (historie) ‎$K: Chytrá zpětná volání ‎[810 bajtů]
  410. (historie) ‎Goto ‎[809 bajtů]
  411. (historie) ‎Concat ‎[803 bajtů]
  412. (historie) ‎StrComp ‎[800 bajtů]
  413. (historie) ‎DiskFree ‎[797 bajtů]
  414. (historie) ‎Mark ‎[796 bajtů]
  415. (historie) ‎Release ‎[795 bajtů]
  416. (historie) ‎PutPixel ‎[789 bajtů]
  417. (historie) ‎DiskSize ‎[785 bajtů]
  418. (historie) ‎FileSearch ‎[781 bajtů]
  419. (historie) ‎Řetězcové operátory ‎[779 bajtů]
  420. (historie) ‎StrLComp ‎[778 bajtů]
  421. (historie) ‎$L: Přilinkování souboru .OBJ ‎[778 bajtů]
  422. (historie) ‎OvrInit ‎[777 bajtů]
  423. (historie) ‎GraphErrorMsg ‎[775 bajtů]
  424. (historie) ‎Prečo Pascal ‎[774 bajtů]
  425. (historie) ‎Break ‎[772 bajtů]
  426. (historie) ‎StrPos ‎[770 bajtů]
  427. (historie) ‎GetModeName ‎[769 bajtů]
  428. (historie) ‎OUT - výstup slova nebo byte ‎[768 bajtů]
  429. (historie) ‎For ‎[768 bajtů]
  430. (historie) ‎MOV Crn - naplň a ulož řídicí registry ‎[766 bajtů]
  431. (historie) ‎216 - Chyba obecné ochrany ‎[759 bajtů]
  432. (historie) ‎FSearch ‎[753 bajtů]
  433. (historie) ‎GetModeRange ‎[752 bajtů]
  434. (historie) ‎StrIComp ‎[751 bajtů]
  435. (historie) ‎StrLCat ‎[749 bajtů]
  436. (historie) ‎OvrSetRetry ‎[749 bajtů]
  437. (historie) ‎Record ‎[745 bajtů]
  438. (historie) ‎FileMode ‎[744 bajtů]
  439. (historie) ‎StrECopy ‎[744 bajtů]
  440. (historie) ‎GotoXY ‎[744 bajtů]
  441. (historie) ‎StrCat ‎[743 bajtů]
  442. (historie) ‎PieSlice ‎[741 bajtů]
  443. (historie) ‎LineRel ‎[741 bajtů]
  444. (historie) ‎CWD - konvertuj slovo do dvouslova ‎[740 bajtů]
  445. (historie) ‎$R: Kontrola rozsahu ‎[739 bajtů]
  446. (historie) ‎Pred ‎[737 bajtů]
  447. (historie) ‎Pos ‎[736 bajtů]
  448. (historie) ‎Readln ‎[735 bajtů]
  449. (historie) ‎OvrSetBuf ‎[734 bajtů]
  450. (historie) ‎OvrGetRetry ‎[733 bajtů]
  451. (historie) ‎Random ‎[730 bajtů]
  452. (historie) ‎AAD - nastav ASCII AX před delením ‎[728 bajtů]
  453. (historie) ‎Succ ‎[726 bajtů]
  454. (historie) ‎DirectVideo ‎[720 bajtů]
  455. (historie) ‎Interface ‎[720 bajtů]
  456. (historie) ‎SizeOf ‎[716 bajtů]
  457. (historie) ‎AAM - nastav ASCII AX po násobení ‎[715 bajtů]
  458. (historie) ‎Výrazy integrovaného assembleru ‎[714 bajtů]
  459. (historie) ‎MoveRel ‎[713 bajtů]
  460. (historie) ‎TSearchRec ‎[710 bajtů]
  461. (historie) ‎$S: Kontrola přetečení zásobníku ‎[709 bajtů]
  462. (historie) ‎$F ‎[707 bajtů]
  463. (historie) ‎Const ‎[707 bajtů]
  464. (historie) ‎Operandy integrovaného assembleru ‎[704 bajtů]
  465. (historie) ‎GetPixel ‎[704 bajtů]
  466. (historie) ‎HighVideo ‎[700 bajtů]
  467. (historie) ‎SetTime ‎[697 bajtů]
  468. (historie) ‎Objekt ‎[696 bajtů]
  469. (historie) ‎$SAVE ALL ‎[695 bajtů]
  470. (historie) ‎SetCurDir ‎[693 bajtů]
  471. (historie) ‎CheckSnow ‎[693 bajtů]
  472. (historie) ‎GetDriverName ‎[691 bajtů]
  473. (historie) ‎GetCurDir ‎[689 bajtů]
  474. (historie) ‎$V: Kontrola řetězcových parametrů ‎[688 bajtů]
  475. (historie) ‎File ‎[688 bajtů]
  476. (historie) ‎LowVideo ‎[687 bajtů]
  477. (historie) ‎ParamStr ‎[685 bajtů]
  478. (historie) ‎RemoveDir ‎[680 bajtů]
  479. (historie) ‎CBW - konvertuj byte na slovo ‎[677 bajtů]
  480. (historie) ‎Move ‎[677 bajtů]
  481. (historie) ‎UpCase ‎[675 bajtů]
  482. (historie) ‎Var ‎[675 bajtů]
  483. (historie) ‎SetDate ‎[672 bajtů]
  484. (historie) ‎$CAP MSG (filtr) ‎[670 bajtů]
  485. (historie) ‎CheckBreak ‎[669 bajtů]
  486. (historie) ‎Addr ‎[667 bajtů]
  487. (historie) ‎Booleovské operátory ‎[665 bajtů]
  488. (historie) ‎StrPCopy ‎[660 bajtů]
  489. (historie) ‎Operační kódy instrukcí ‎[655 bajtů]
  490. (historie) ‎EnvStr ‎[655 bajtů]
  491. (historie) ‎GetMaxY ‎[652 bajtů]
  492. (historie) ‎GetMaxX ‎[652 bajtů]
  493. (historie) ‎CreateDir ‎[649 bajtů]
  494. (historie) ‎While ‎[649 bajtů]
  495. (historie) ‎Public ‎[647 bajtů]
  496. (historie) ‎WindMax ‎[646 bajtů]
  497. (historie) ‎WindMin ‎[646 bajtů]
  498. (historie) ‎Label ‎[646 bajtů]
  499. (historie) ‎Typové konstanty ovrlejí v SYSTEM.TPU ‎[643 bajtů]
  500. (historie) ‎External ‎[638 bajtů]

Ukázat (500 předchozích | 500 následujících) (20 | 50 | 100 | 250 | 500).